SPYDER EXTRAS RYKER FORWARD / REVERSE SHIFTER GRIP RYK-SHFT
$69.95
Description
SPYDER EXTRAS RYKER FORWARD / REVERSE SHIFTER GRIP FOR ALL RYKER MODELS
- Easily Installs over existing Shifter Shaft
- Allows for better grip in the forward & reverse poistions.
- To Improve the Ryker Shifter, Remove the Shifter bolt on the Shifter at the Shifter Shaft location on the gear box. Notice where your reverse position is before you remove the shaft. Once the bolt is removed take a screwdriver and slightly separate the shifter sides that grip the shifter shaft. Doing so allows the shaft to lift off the shifter rod. Rotate the shifter arm to the reverse position and place back on shaft, reinstall the bolt and tighten down. Now the forward position is located where the reverse used to be. The Reverse is closer now to the rider. This allows the shifter to rotate the shaft as designed as in its original location the shifter arm was pulling against the shaft not rotating the shaft. With this adjustment all your shifter problems will be solved!!
