CAN-AM RYKER RED WHITE AND BLUE FIVE STAR WHEEL CENTER CAPS

Description

CAN-AM RYKER RED WHITE AND BLUE 5-STAR WHEEL CENTER CAPS BY BLR TUNING

THESE ARE OUR BRAND NEW FIVE-STAR CENTER CAPS. YOU WILL RECEIVE ONE RED ONE WHITE AND ONE BLUE CENTER CAP IN THIS ORDER.

THE LOCKING MECHANISMS FOR EACH WHEEL WILL BE INCLUDED AS WELL. THE LOCKING MECHANISMS ARE MARKED WITH AN F FOR FRONT AND AN R FOR REAR ON THE INSIDE OF THE LOCK.

EACH LOCK IS TEST FITTED BEFORE SHIPPED TO ENSURE A PERFECT FIT EVERY TIME.

ON THE 2022 MODELS. THIS INCLUDES THE 2022 600, 900, RALLY, SPORT. SO FAR WE HAVE HAD TWO CUSTOMERS CLAIM THEY WOULD NOT FIT ON THEIR 22 MODEL BIKE. WE ARE STILL WORKING ON ADDRESSING THIS. WE HAVE HAD OTHER CUSTOMERS THAT HAVE HAD THEM ON THEIR 22 MODEL BIKE FOR QUITE SOME TIME WITH ZERO ISSUES. SO IF YOU HAVE A 22 MODEL, PURCHASE THESE AT YOUR OWN RISK UNDERSTANDING THAT THEY MAY NOT FIT PERFECTLY. HOWEVER THEY MAY FIT PERFECT. IT SEEMS THAT CAN-AMS TOLERANCES ON THE 22 MODELS FOR THE CENTER OF THE HUBS IS A QUITE LARGE TOLERANCE. THESE MAY FIT PERFECT THEY MAY NOT FIT AT ALL. YOU WILL NOT KNOW UNTIL YOU TRY IT. PURCHASE AT YOUR OWN RISK. ONCE WE HAVE ADDRESSED THIS ISSUE YOU’LL SEE A DIFFERENT MESSAGE HERE. ALL OTHER MODELS 2019 TO 2021 THESE FIT PERFECT AND WE HAVE NOT HAD ANY ISSUES WHATSOEVER. WE HAVE SOLD MORE THAN 300 SETS OF THESE.

SHIPPING IS INCLUDED IN THE PRICE. WE SHIP ANYWHERE IN THE USA.

DO NOT OVER TIGHTEN

In the kit (LOCKS+CAPS) you will receive three locking mechanisms two for the front wheels one for the rear wheel. You will have three stainless steel bolts that use a 3 mm Allen wrench.

IF YOU ALREADY HAVE OUR LOCKS BUT YOU WANT TO PURCHASE A NEW SET OF CAPS –

MESSAGE US, OR SEND AN EMAIL TO BLRTUNING.TECH@GMAIL.COM TO REQUEST JUST THE CAPS YOU WANT. WE NEED TO KNOW THAT YOU ALREADY HAVE A SET OF OUR LOCKS, WE NEED YOUR COLOR CHOICE, WE NEED TO KNOW WHAT STYLE OF CAPS YOU WANT.

THIS IS A 5-MINUTE INSTALLATION. LINK TO THE YOUTUBE INSTALLATION VIDEO IS AT THE BOTTOM OF THIS DESCRIPTION.

YOU WILL NEED A 3 MM ALLEN WRENCH. YOU DO NOT NEED TO DISASSEMBLE THE BIKE WHATSOEVER.

TO INSTALL – LINEUP THE C-CLIP STICKING OUT INSIDE THE HUB. SLIDE IN ,,, SLOWLY TWIST RIGHT,,, THEN PULL LIGHTLY OUT TOWARDS YOU AND THEN TURN RIGHT AGAIN.

TO UNINSTALL – PULL OUT TOWARDS YOU LIGHTLY,,, TURN LEFT,,, THEN PULL STRAIGHT OUT.

5 STAR – our five star wheel cap has a five-star design but a very futuristic 3D raised effect to it. The light reflects off of it because of all the cut angles. Our 5 STAR design is in honor of our 5 STAR Etsy shop.

WE DO HAVE TONS OF OTHER COLORS AND CHOICES FOR OUR CENTER CAPS IN A DIFFERENT LISTING HERE ON OUR WEBSITE.

CHECK OUT THE INSTALLATION VIDEO.

IT TAKES 22 HOURS OF PRINT TIME TO MAKE A SET OF THREE. THIS IS BECAUSE WE PRINT AT A VERY SLOW SPEED TO ENSURE A VERY HIGH QUALITY. THESE ARE MADE FROM THE HIGHEST QUALITY PLA THAT WE CAN GET OUR HANDS ON.

IF YOU HAVE ANY QUESTIONS MESSAGE ME.

IF YOU WOULD LIKE US TO CREATE ANY OTHER CENTER CAP DESIGNS PLEASE MESSAGE US WITH YOUR IDEAS.

LOCKING MECHANISM – US PATENT PENDING